🚰 How Water Gets to Your Tap
5th Grade 🏭 How It’s Made
You turn on the faucet and clean water pours out — but that water has been on a long trip. It may have started as rain in faraway mountains or deep underground, then traveled through pipes, tunnels and a treatment plant before it reached your glass. In this lesson we follow it there, and back out again.
Where the water comes from
In the United States, most tap water comes from two kinds of sources. Surface water comes from rivers, lakes and reservoirs — big lakes made by building a dam. Groundwater is rain and snowmelt that soaks into the ground and collects in layers of rock and gravel called aquifers. Groundwater is pumped up through wells — deep pipes with pumps.
Some cities bring their water from very far away. New York City gets most of its water from reservoirs in the mountains upstate and carries it to the city through long aqueducts and tunnels. Los Angeles has brought in water from distant mountains since its first big aqueduct opened in 1913. In dry places, saving and moving water is a huge engineering job.
Inside a water treatment plant
Before water reaches homes, it’s cleaned at a treatment plant. First, chemicals are mixed in that make tiny bits of dirt clump together into bigger clumps. In calm tanks, the heavy clumps sink to the bottom. Then the water flows through filters of sand, gravel and sometimes charcoal that catch even smaller particles.
Finally, the water is disinfected, usually with a small amount of chlorine that kills germs and keeps the water clean all the way through the pipes. Many towns also add a little fluoride to help protect teeth. Water is sampled and tested in labs regularly, following safety rules set by the US Environmental Protection Agency (EPA).
Turning seawater into drinking water
Some dry places near the ocean also make drinking water from seawater. This is called desalination — taking the salt out. One of the largest plants in the Western Hemisphere is in Carlsbad, California, near San Diego, and there are smaller plants in other states, such as Florida and Texas.
Most of these plants use reverse osmosis: seawater is filtered to remove sand and dirt, then pushed at very high pressure through membranes — sheets with holes so tiny that water molecules squeeze through but most of the salt stays behind. A few minerals are added back to the fresh water, and the extra-salty leftover water, called brine, is returned to the sea carefully. Desalination uses a lot of electricity, so it’s expensive, and saving water still matters.
Storage, pipes and the trip back out
Clean water is stored in tanks and water towers, often on hills or high stands. A tall water tower uses gravity: the water flows down from it and creates pressure in the pipes, so it can reach upper floors. From there it travels through pipes under the streets, through your home’s water meter, all the way to the faucet.
Water that goes down the sink, shower and toilet flows through sewers to a wastewater treatment plant. There, solids are separated out, and helpful bacteria break down the waste in big tanks. The cleaned water is usually returned to a river or the ocean, and more and more of it is reused to water parks, golf courses and farm fields. In some places in California, wastewater is purified so well that it’s used to refill underground aquifers. And at home? Shorter showers and turning off the faucet while you brush your teeth save lots of water.
Key facts
- US tap water comes from surface water (rivers, lakes, reservoirs) or groundwater (aquifers).
- Treatment plants clump dirt, let it settle, filter the water and then disinfect it.
- A small amount of chlorine kills germs and keeps water clean in the pipes.
- Most desalination plants use reverse osmosis to push water through membranes that hold back salt.
- A water tower uses gravity to create pressure in the pipes.
- Treated wastewater is often reused to water parks, golf courses and farms.
Quick quiz
Where does New York City get most of its water?
What happens at a desalination plant?
What is reverse osmosis?
Why is a small amount of chlorine added to drinking water?
What is groundwater?
In a treatment plant, why are chemicals added to make dirt clump together?
Why does desalination use so much electricity?
How does a water tower help water reach upper floors?
💭 Think and talk about it
- If we can make drinking water from seawater, why is it still important to save water?
- Why do you think some cities bring water from hundreds of miles away instead of using what’s nearby?
- Try it at home: how many ways can you find to save water in one day?
Questions kids ask
Is tap water in the US safe to drink?
In most places, yes. Public water systems are tested regularly and must follow EPA safety rules. If there’s a problem in an area, the local water utility tells people what to do, such as boiling water before drinking it.
What is the white crust inside a kettle?
Water has dissolved minerals in it, mostly calcium. When water boils, some of them settle out and form a white layer called scale. It isn’t dangerous.
Does wastewater ever become drinking water again?
Usually treated wastewater goes back to rivers or is used for watering, not drinking. But in a few places, it’s purified with extra steps like reverse osmosis and then used to refill aquifers or reservoirs, which later supply drinking water after more treatment.