💡 Electricity and Electric Circuits

5th Grade 🔬 Science

An electric circuit is a closed path that electric current can flow around: from a power source, like a battery, through wires to something that uses electricity, like a bulb, and back to the source. If the path is broken anywhere, the current stops.

Free · US Letter · no sign-up
Google Classroom Save to Pinterest Email me

What does it take to light a bulb?

A simple circuit has a few parts. A power source — a battery — with two ends called terminals: plus (+) and minus (−). Wires that carry current, usually copper covered in plastic. A load — something that uses the electricity, like a bulb, a buzzer or a little motor. And often a switch, so you can turn it on and off.

For current to flow, all the parts must be connected in one complete loop: a wire from one end of the battery to the bulb, and another wire from the bulb back to the other end of the battery. That’s called a closed circuit. If a wire comes loose, the circuit is open, and the bulb goes out.

A common mistake is thinking that one wire from the battery to the bulb is enough, like a hose bringing water. Without the path back to the battery, there’s no circuit, and the bulb won’t light.

The switch — the gatekeeper

A switch is simply an easy way to open and close a circuit. When you flip the light switch in your room to “on,” a metal piece inside closes the gap, and current can flow. When you flip it off, a gap opens, the circuit is broken and the light goes out. The on button of a flashlight or a toy works the same way.

You can connect more than one load in a circuit. When two bulbs are connected one after the other in a single loop (a series circuit) and one burns out, the circuit opens and the other one goes dark too. Homes are wired differently: each light and outlet gets its own path (a parallel circuit), so when one bulb in your house burns out, all the others keep working.

Conductors and insulators

Some materials let electric current pass through easily — they’re called conductors. Most metals are good conductors, like copper, iron and aluminum. Other materials hardly let current through at all — they’re called insulators: plastic, rubber, glass and dry wood.

That’s why electrical wires are metal on the inside, to carry the current, and wrapped in plastic on the outside, to insulate them and protect us. Tap water and the human body conduct electricity too, which is why electricity and water are a very dangerous combination.

Electrical safety — very important!

The electricity in a wall outlet is far stronger than a battery: in the United States, an outlet supplies about 120 volts, while an AA battery has only 1.5 volts. Outlet electricity can cause serious injuries and can even kill. Never put objects into an outlet, never touch an electrical device with wet hands, never use a damaged cord, and stay far away from power lines that have fallen — call an adult right away. Do all your experiments with small, ordinary batteries only.

Try it at home: a conductor tester

You need an AA battery, a small flashlight bulb in a holder or an LED, three wires with bare ends, and tape. Connect a wire from one end of the battery to the bulb, and a second wire from the bulb out to a free end. Tape a third wire to the other end of the battery. Touch the two free ends together — the bulb should light. If you’re using an LED and it doesn’t light, flip its connection around: an LED only works in one direction.

Now touch the two free ends to different objects: a metal spoon, an eraser, a key, a plastic ruler, a strip of aluminum foil, a wooden pencil. Make a chart of which objects light the bulb (conductors) and which don’t (insulators). Safety: never connect the two ends of the battery directly with a wire and no bulb — the wire and battery get hot. And keep small button batteries away from little kids, because swallowing one is very dangerous.

Key facts

  • A circuit must be closed for current to flow.
  • The parts of a circuit: a power source, wires, a load, and often a switch.
  • Metals are conductors; plastic, rubber and dry wood are insulators.
  • A switch opens and closes the circuit.
  • Never play with a wall outlet.

Quick quiz

  1. What does a bulb in a circuit need to light up?

  2. What does a switch do?

  3. Which of these is a good conductor?

  4. Why are electrical wires covered in plastic?

  5. What happens when a wire in a circuit comes loose?

  6. Which of these should you never do?

  7. In the conductor tester, what happens when you touch a plastic ruler?

  8. Why does an LED sometimes light only after you flip its connection?

💭 Think and talk about it

  1. Find three different switches in your home. What does each one open and close?
  2. Why do you think a plug has metal prongs but a plastic part where you hold it?
  3. What would one whole day of your life look like with no electricity at all?

Questions kids ask

What’s the difference between a closed circuit and an open circuit?

A closed circuit has a complete path, so current flows and the bulb lights. An open circuit has a gap in the path, so the current stops and the bulb stays dark.

Does water conduct electricity?

Yes. Tap water conducts electricity, which is why electricity and water are a very dangerous mix.

Can kids do experiments with electricity?

Yes, but only with small, ordinary batteries, and it’s best with an adult watching. Never with a wall outlet or with devices that are plugged in.

🔎 Ask Thinkapedia another question