🔌 Current, Voltage and Resistance: Ohm’s Law

8th Grade 🔬 Science

In elementary school you learned that a circuit has to be closed for a bulb to light. In middle school you learn to measure electricity: how much current flows, how hard it is being pushed and what gets in its way. These three quantities are connected by one simple rule — Ohm’s law.

Free · US Letter · no sign-up
Google Classroom Save to Pinterest Email me

Current, voltage and resistance

An electric current is an organized flow of electric charges. In metal wires, these are electrons moving along the wire. The size of the current tells how much charge passes each second, and it is measured in amperes (amps).

For the charges to move, something has to push them. That push is called voltage, and it is measured in volts. An ordinary AA battery gives 1.5 volts, and a regular wall outlet in an American home gives about 120 volts — dangerous for people.

Every part of a circuit gets in the way of the current a little. That opposition is called resistance, and it is measured in ohms. A thick copper wire has very low resistance; the thin wire inside an old-style light bulb or a toaster has high resistance, so it heats up and glows.

A helpful picture is water flowing in a pipe. Voltage is like the water pressure pushing the water, current is like the amount of water passing each second, and resistance is like a narrow pipe that makes the flow harder.

Ohm’s law

In 1827, the German physicist Georg Ohm published the link between the three quantities: voltage equals current times resistance, V = I·R. That means if you double the voltage, the current doubles too. If you double the resistance, the current is cut in half.

Example: a bulb with a resistance of 6 ohms is connected to a 12-volt battery. The current is 12 divided by 6, or 2 amps. You measure current with an ammeter, which is connected in series — right in the path of the circuit. You measure voltage with a voltmeter, which is connected in parallel — across the part, on both sides of it.

Series and parallel circuits

In a series circuit, all the parts are connected in a single chain, and the current passes through each one in turn. The same current flows through every part, and the resistances add up. So when you add another bulb in series, the total resistance goes up, the current goes down and all the bulbs glow dimmer. And if one bulb burns out, the circuit is broken and they all go dark.

In a parallel circuit, each part has its own path, and each branch gets the full voltage of the source. If one bulb burns out, the others stay lit. That’s how homes are wired: every device gets about 120 volts and can be switched on and off separately. But each device you add increases the total current in the main wire.

Power and safety

Electric power tells how much energy a device uses each second. It equals voltage times current, P = V·I, and it is measured in watts. A 1,500-watt space heater plugged into a 120-volt outlet draws a current of 12.5 amps.

When too many powerful devices are plugged into the same circuit, or when there is a short circuit — a direct connection with almost no resistance — the current gets very large and the wires can overheat and start a fire. That’s why every home has circuit breakers that cut off the current when it gets too high, and why kitchens and bathrooms have GFCI outlets (the ones with “test” and “reset” buttons) that shut off the power if current starts leaking through a person’s body. And never touch electrical devices with wet hands.

Key facts

  • Current is measured in amps, voltage in volts and resistance in ohms.
  • Ohm’s law: voltage = current × resistance (V = I·R).
  • An ammeter is connected in series; a voltmeter is connected in parallel.
  • Home wiring is in parallel; US outlets supply about 120 volts.
  • Power = voltage × current, measured in watts.

Quick quiz

  1. What does Ohm’s law say?

  2. A 12-volt battery is connected to a 6-ohm bulb. What is the current?

  3. What unit is voltage measured in?

  4. What happens to bulbs in series when you add another bulb?

  5. Why are homes wired in parallel?

  6. How do you connect a voltmeter to a bulb?

  7. What does a circuit breaker in the electrical panel do?

  8. What is the power of a device that runs on 120 volts and draws 2 amps?

💭 Think and talk about it

  1. Some old strings of holiday lights went completely dark when one bulb burned out. How do you think those bulbs were connected?
  2. Check the wattage on three devices at home. Which one uses the most energy in an hour?
  3. Why is it dangerous to plug lots of powerful devices into one power strip?

Questions kids ask

Why can birds sit on power lines?

Because both of their feet are on the same wire, at almost the same voltage, so almost no current flows through their bodies. If a bird touched two different wires at the same time, it could be electrocuted.

What’s the difference between direct current and alternating current?

In direct current (DC), like from a battery, the charges always flow in the same direction. In alternating current (AC), like from a wall outlet, the direction keeps switching back and forth — in the United States, 60 full cycles every second.

Does Ohm’s law work for every part?

Not exactly. It works well for resistors and metal wires kept at a steady temperature. In an incandescent bulb, the resistance rises as the filament heats up, and some parts, like diodes, don’t follow it at all.

🔎 Ask Thinkapedia another question