⚙️ Simple Machines: Levers, Pulleys, Ramps and More

4th Grade 🔬 Science

A simple machine is a tool with no motor that makes a force easier to use — for example, lifting a heavy load with a small push. The main simple machines are the lever, the pulley, the inclined plane, the wheel and axle, the wedge and the screw.

Free · US Letter · no sign-up
Google Classroom Save to Pinterest Email me

What makes a tool a machine?

When we hear “machine,” we think of a washing machine or a car. But in science, scissors, a bottle opener and a wheelchair ramp are machines too. A simple machine is a tool that changes how big a force you need, or which direction you push, to get a job done.

There’s an important trade-off: a simple machine doesn’t give you something for free. To use a smaller force, you usually have to move it over a longer distance. When you walk up a long ramp instead of stairs, each step takes less effort — but the path is longer.

The lever

A lever is a bar that turns around a fixed point called the fulcrum. A seesaw on the playground is a lever: the board is the bar and the pivot in the middle is the fulcrum. When a grown-up and a kid sit on a seesaw, the grown-up has to sit closer to the middle for it to balance.

The secret of a lever is distance: the farther from the fulcrum you push, the less force you need. That’s why it’s easier to pry open a paint can with a long screwdriver, and why a doorknob is on the side far from the hinges. Scissors, pliers, bottle openers and wheelbarrows are levers too.

The pulley

A pulley is a wheel with a groove that a rope runs through. A single pulley fixed to the ceiling doesn’t make the force smaller, but it changes its direction: instead of lifting a bucket up, you pull the rope down, which is easier because you can use your body weight. That’s how a flag is raised up a flagpole, and how buckets were once pulled up from wells.

When several pulleys are connected, the rope runs back and forth between them, and you can lift a heavy load with a much smaller force — but you have to pull much more rope. Tall construction cranes use pulley systems like this.

The inclined plane and its relatives

An inclined plane is simply a slanted surface, like a ramp. It’s easier to roll a barrel up a ramp than to lift it straight up. The longer and gentler the ramp, the less force you need. Mountain roads zigzag back and forth for the same reason — they make the route longer so the climb is gentler.

The wedge and the screw are related to the inclined plane. A wedge is really two inclined planes back to back, like the blade of an ax or a knife, and it splits and separates things. A screw is an inclined plane wrapped around a rod, so with every turn it moves a little deeper into the wood.

A wheel and axle is a big wheel attached to a narrow rod that turns with it. A faucet handle, a steering wheel and a screwdriver work this way: you turn the wide part with a small force, and the narrow part turns with a big force.

Simple machines in your body and in history

Your body has levers too: when you lift something in your hand, your forearm bones turn around your elbow like a bar around a fulcrum, and your muscles supply the force. Your front teeth work like wedges that cut food.

People have used simple machines since ancient times. Ramps, levers and rollers helped move giant stones for ancient buildings, long before engines were invented. These ideas work so well that they’re still inside the most advanced machines today.

Key facts

  • A simple machine lets you use a smaller force, or push in a more convenient direction.
  • With a lever, the farther from the fulcrum you push, the less force you need.
  • One pulley changes the direction of a force; several pulleys together make it smaller.
  • A long, gentle ramp takes less force but a longer path.
  • A screw is an inclined plane wrapped around a rod, and a wedge is two inclined planes.

Quick quiz

  1. What is the point a lever turns around called?

  2. Which of these is an example of a lever?

  3. What does a single pulley fixed to the ceiling do?

  4. Why do mountain roads zigzag?

  5. What is the “price” of using a simple machine to push with less force?

  6. Scientifically, what is a screw?

  7. Which tool is a wedge?

  8. Why is a doorknob on the side far from the hinges?

💭 Think and talk about it

  1. Walk around your kitchen and find at least four simple machines. What kind is each one?
  2. Why do you think public buildings need ramps at their entrances? Who do they help?
  3. How would you design a machine to lift a basket of toys up to the second floor of a house?

Questions kids ask

How many simple machines are there?

Usually six are counted: the lever, pulley, inclined plane, wheel and axle, wedge and screw. Most complicated machines are built from a combination of several of them.

Does a simple machine save work?

It doesn’t reduce the total amount of work, but it spreads it out differently: less force over a longer distance. That’s what turns a hard job into one you can actually do.

Is a bicycle a simple machine?

A bicycle is a compound machine made of several simple machines — for example, wheels and axles in the pedals and wheels, and levers in the brake handles.

🔎 Ask Thinkapedia another question