🔬 1st Grade · Science1-PS4-1Unit 1: Light & sound

Loud and soft, high and low

🎯 Objective: Students change the volume and pitch of a sound.

📘 This lesson comes as a booklet: teacher’s plan, student worksheet, challenge page, quiz and answer key — all in one printable booklet. Teach from this page, print it all, or give the quiz to the class online.

Full-screen slides for the projector: goals, opener, every drawing already made, the exit ticket and the quiz — click or use the arrow keys.

✅ Quiz & class code

🗓️ Lesson at a glance

⏱️ 50 minutes

  1. 5 min Opener (pick one)
  2. 5 min Teach: loud and soft, high and low
  3. 6 min Test it: pluck softly and hard
  4. 7 min Test it: tighter and looser
  5. 12 min Build: rubber-band guitar
  6. 4 min Game: sound commands — if time
  7. 3 min Exit ticket
  8. 3 min Wrap-up
  9. 5 min Handing out, moving and cleaning up

Short on time? Skip the steps marked “if time” — the lesson still works.

Not in these 50 minutes: the worksheets (independent practice tomorrow, in centers or as homework) and the quiz (after the practice, or at the end of the week).

🧰 Materials

  • Open boxes (shoeboxes, tissue boxes or small plastic containers) — one per pair
  • Rubber bands of different thickness — 3 per pair (thin, medium, thick)
  • A pencil or craft stick per pair to slide under the bands as a bridge
  • A teacher-made rubber-band guitar (for the mystery opener)
  • Safety goggles if you have them
  • The printable worksheet, pencils

🔤 Key words

loud
A big, strong sound.
soft
A small, quiet sound.
high
A sound like a bird or a whistle.
low
A sound like a big drum or a bear’s growl.
pitch
How high or low a sound is.
pluck
To pull a string or band and let it go.

🎯 Success criteria — read them to the class

  • I can make a sound louder or softer.
  • I can make a sound higher or lower.
  • I can tell that loud and high are not the same thing.

🎬 Open the lesson — pick one (5 min)

Get the class moving, curious and talking before the learning starts. Each one leads straight into today’s topic.

🤸 Brain break: Mouse and bear

  1. Stand up. Crouch down small like a little mouse. Squeak a tiny, high, soft “eee.”
  2. Stand up big like a bear. Say a low, soft “ohhh.”
  3. Reach up high on your tiptoes and sing a high “la.”
  4. Bend your knees low and sing a low “la.”
  5. Back to mouse size, one soft squeak — and sit down quietly.

Say: “You made high sounds and low sounds, all in soft voices. Today you learn how to change a sound in two ways: loud or soft, and high or low.”

🧩 Riddle

“A bird sings me. A big drum booms the other way. I tell if a sound is like a squeak or like a rumble. What am I?”

Hint: Think high and low.

Answer

How high or low a sound is! Scientists call it pitch. Today we change the pitch — and the loudness — of a sound.

🎁 Mystery object

Do: Hide a rubber-band guitar (an open box with three rubber bands of different thickness stretched across it) under a cloth.

Say: “Listen. I will pluck three sounds under this cloth. How are they different? What could be making them?”

Reveal: Pluck the thick band, then the medium one, then the thin one. Uncover the box. Ask: “Which band made the highest sound?” The thin one. Today you build one.

🤔 Would you rather

“Would you rather hear a tiny whistle or a giant drum?”

Do: Students reach up high for the whistle or crouch low for the drum, and tell a partner why.

Then: A tiny whistle makes a high sound. A giant drum makes a low sound. Today you learn how to change sounds from high to low.

🧑‍🏫 Teach it step by step

  1. 1 Teach: loud and soft, high and low 5 min

    Do:
    • Draw two arrows on the board: one labeled loud ↔ soft, one labeled high ↔ low.
    Say:

    “We know sound is made when something vibrates. Today we change sounds in two ways.”

    “Loud and soft: is it a big sound or a quiet sound? A shout is loud. A whisper is soft.”

    “High and low: is it like a squeak or like a rumble? A bird’s song is high. A big drum is low. How high or low a sound is is called its pitch.”

    “These are two different things! A mouse squeak is high and soft. A big drum can be low and loud.”

    Ask: Is a whisper loud or soft? Is a bird’s song high or low?

    Look for: A whisper is soft. A bird’s song is high.

  2. 2 Test it: pluck softly and hard 6 min

    Do:
    • Give each pair a box with one rubber band stretched around it the long way.
    • Partners take turns plucking the band gently, then a little harder. Watch how far the band moves each time.
    Say:

    “Pluck the band gently. Listen. Now pull it a little farther and let go. Listen again.”

    “Which sound was louder? The harder pluck.”

    “Look at the band. When you pluck harder, the band moves back and forth farther. Bigger vibrations make a louder sound.”

    “Safety: pluck the band on the box. Never stretch a rubber band toward a face.”

    Ask: How do you make the sound louder?

    Look for: Pluck harder, so the band vibrates bigger (moves farther).

  3. 3 Test it: tighter and looser 7 min

    Do:
    • Pairs slide a pencil under the band near one end as a bridge. They pluck, then press down on one side of the band with a finger to make it tighter, and pluck again.
    • Then they try a thin band and a thick band side by side.
    Say:

    “Pluck the band. Now press the band down on one side of the bridge to make it tighter. Pluck again. What changed?”

    “The tighter band makes a higher sound!”

    “Now pluck a thin band and a thick band. Which is higher? Usually the thin one.”

    “Tighter or thinner bands make higher sounds. Looser or thicker bands make lower sounds.”

    Ask: You want a lower sound. What can you change?

    Look for: Use a looser band or a thicker band.

  4. 4 Build: rubber-band guitar 12 min

    Do:
    • Pairs stretch three bands (thin, medium, thick) around their box, slide a pencil bridge under them, and pluck each one.
    • They order the bands from lowest to highest sound and record it on the worksheet.
    • Then they play: one loud high sound, one soft low sound, one soft high sound.
    Say:

    “Put all three bands on your box. Pluck each one. Which is lowest? Which is highest?”

    “Now play a soft, high sound. Now a loud, low sound. You can change both!”

    “Gentle plucks — we want to hear our partner too.”

    Ask: Walk around and ask: “How did you make that sound higher? How did you make it louder?”

    Look for: Higher: a thinner or tighter band. Louder: a harder pluck.

  5. 5 Game: sound commandsif time 4 min

    Do:
    • Call out commands. Pairs play the sound on their guitar (or with their voice): “Soft and low!” “Loud and high!” “Soft and high!”
    Say:

    “Listen to my command and play it. Ready? Soft and low!”

    “Loud and high — but not too loud!”

    Ask: Can a sound be soft and high at the same time?

    Look for: Yes — a quiet squeak or a gentle pluck on a thin band.

  6. 6 Exit ticket 3 min

    Do:
    • Each student answers on a sticky note or the bottom of the worksheet.
    Say:

    “How do you make a louder sound with a rubber band?”

    ✅ Correct answer: Pluck it harder (pull it farther before letting go), so it vibrates bigger. If a student writes “stretch it tighter,” that makes the sound higher, not louder — ask them to test both and listen again.

  7. ✓ Wrap-up 3 min

    Do:
    • Read the three “I can” statements aloud.
    • Sort the exit tickets into got it / almost / not yet.
    Say:

    “Tell your neighbor how to make a sound louder, and how to make it higher. Are those the same?”

    “Show me with your fingers how sure you are: 1 = not yet, 2 = almost, 3 = I can teach it.”

💡 Teacher tips

  • Pre-sort rubber bands into sets of three (thin, medium, thick) in zip bags. Long bands that wrap around a box work best.
  • Open boxes work better than closed ones — the sound is louder and the bands don’t rub on a lid.
  • Teach the rubber-band rule first: bands stay on the box. Anyone who snaps or aims a band loses it for the lesson. Use goggles if your school has them.
  • Keep saying both pairs of words: loud/soft and high/low. Children often call a high sound “loud.” Correct it gently every time.
  • Use a hand signal for each: hand up and down for high/low, hands wide or close for loud/soft.

💬 Discussion questions

  1. How is a loud sound different from a high sound?

    Loud is about how big or strong a sound is. High is about whether it is like a squeak or a rumble. A sound can be high and soft.

  2. Why does plucking harder make a louder sound?

    The band moves back and forth farther — a bigger vibration makes a louder sound.

  3. Why do guitars have thin and thick strings?

    Thin strings make higher sounds and thick strings make lower sounds, so you can play many notes.

⚠️ Common mistakes and how to fix them

❌ Mixing up loud and high.

✔️ Squeak softly like a mouse: high and soft. Then say “boom” in a deep, quiet voice: low and soft. Loud and high are different.

❌ Thinking stretching a band makes it louder.

✔️ Test it: tighter makes higher. To make louder, pluck harder.

❌ Thinking big things always make high sounds.

✔️ Compare a big drum and a small bell. The big drum is lower.

🧩 For every learner

🤝 Extra support

  • Use only two bands: one thin, one thick.
  • Use the hand signals with each word.
  • Frame: “This sound is ___ and ___.”

🚀 Challenge

  • Can you play a short tune with three notes? Teach it to a friend.
  • Find two ways to make a band sound higher.
  • Explain why a big drum sounds lower than a small drum.

🌎 English learners

  • Act out each word: arms wide (loud), hands close (soft), reach up (high), crouch (low).
  • Word-wall cards with pictures: a bird (high), a drum (low), a shout (loud), a whisper (soft).
  • Frame: “I made it louder by ___.”

🏠 At home: With a grown-up, stretch two rubber bands around an open box or container — one thin, one thick. Pluck each one softly and then a little harder. Tell your grown-up which is higher and which is louder.

📊 After the exit ticket and quiz: what to do tomorrow

Sort the exit tickets (or open the quiz results — they group the class for you) and start tomorrow with 10 minutes in three groups.

✅ Got it

  • Start the next lesson (mirrors and reflection).
  • Early finishers: the Challenge sheet, or make up a three-note tune on the guitar.

🟡 Almost

  • 5 minutes with a rubber-band guitar: play the teacher’s commands (soft high, loud low) and name what they changed.
  • Check: do they keep loud and high apart?

🔁 Not yet

  • Small group with the teacher: one band. Pluck gently, then harder (louder). Then press it tighter (higher). Say each word with its hand signal.
  • Then the Easier worksheet (circle the word) with the teacher nearby.

🤝 Loud, soft, high, low

Same skill, smaller numbers and fill-in-the-blank steps — for students who need extra support. Everyone else starts on the main worksheet.

Name: ______________________   Date: ____________

A. Circle the right word.

  1. A whisper is (loud / soft).Answer: ________________________
  2. A bird’s song is (high / low).Answer: ________________________
  3. A big drum is (high / low).Answer: ________________________

B. Circle what you do.

  1. To make a louder sound, I pluck (harder / softer).Answer: ________________________
  2. To make a higher sound, I make the band (tighter / looser).Answer: ________________________
  3. To make a softer sound, I pluck (harder / more gently).Answer: ________________________
🔑 Answers
  1. soft
  2. high
  3. low
  4. harder
  5. tighter
  6. more gently

📝 My rubber-band guitar

Name: ______________________   Date: ____________

A. Write loud, soft, high or low.

  1. A fire truck siren up close is ______.Answer: ________________________
  2. A cat purring quietly is ______.Answer: ________________________
  3. A tiny whistle is ______.Answer: ________________________
  4. A bear’s growl is ______.Answer: ________________________

B. My guitar test.

  1. Which band made the highest sound: thin, medium or thick?Answer: ________________________
  2. Which band made the lowest sound?Answer: ________________________
  3. When I plucked harder, the sound got ______.Answer: ________________________
  4. When I made the band tighter, the sound got ______.Answer: ________________________

C. Draw.

  1. Draw your guitar. Write H next to the highest band and L next to the lowest.
🔑 Answers
  1. loud
  2. soft
  3. high
  4. low
  5. thin
  6. thick
  7. louder
  8. higher
  9. A box with three bands; H by the thinnest band, L by the thickest.

🚀 Challenge: sound changer

Name: ______________________   Date: ____________

A. Think and explain.

  1. Liam says, “I stretched my band tighter, so the sound got louder.” Is he right? Explain.Answer: ________________________
  2. Name two ways to make a band sound higher.Answer: ________________________
  3. Can a sound be loud and low? Give an example.Answer: ________________________
  4. Why does plucking harder make the sound louder?Answer: ________________________
🔑 Answers
  1. No. Stretching tighter makes the sound higher. To make it louder, he should pluck harder.
  2. Make it tighter; use a thinner band (also: make the part you pluck shorter).
  3. Yes — a big drum, thunder or a foghorn.
  4. The band moves farther back and forth. A bigger vibration makes a louder sound.

✅ Quiz

12 questions. Show them on the board and answer together, or give each student the quiz on their own device and see everyone’s score.

Students scan the QR code or type the short code, write their name and answer. You get a table with every student’s score and the questions most of the class missed.

1. How do you make a rubber band sound louder?

2. Which sound is high?

3. Which sound is soft?

4. You make a rubber band tighter. What happens to the sound?

5. Which band makes the lowest sound?

6. Liam says, “I made my band tighter, so it is louder.” What should he say?

7. A mouse squeaks quietly. How is the sound?

8. When you pluck harder, what does the band do?

9. Which two words tell about pitch?

10. Mia wants a lower sound. What should she do?

11. Which one is loud AND low?

12. Which is the safe way to use a rubber band?

12 questions

🖨️ Classroom aids to print

Word-wall cards for this lesson’s key words. They print on their own pages.

loudA big, strong sound.
softA small, quiet sound.
highA sound like a bird or a whistle.
lowA sound like a big drum or a bear’s growl.
pitchHow high or low a sound is.
pluckTo pull a string or band and let it go.

Where this lesson fits

  • Before this lesson: Sound can make things move — Students show that sound can make materials vibrate.
  • This lesson: Students change the volume and pitch of a sound.
  • Coming next: Mirrors and reflection — Students redirect a beam of light with a mirror.

📐 Standard

1-PS4-1

Next Generation Science Standards (NGSS), Grade 1 — typical US unit order

🏁 Unit goals

  • Show that vibrating materials make sound
  • Show that objects can be seen only when lit
  • Design a device that uses light or sound to communicate

🌟 Thinkabara Pro

Need this lesson made for your class?

The booklet on this page is free. With Pro you get versions of it: three levels for mixed classes, in Spanish, or adapted for IEP and ELL students — plus a new booklet on any topic you teach that is not in our library.

Make a version for my class — free trial → See a real sample

7 days free, no credit card.

Practice & resources on Thinkabara

🗓️ Plan the whole year like this

Add 1st Grade Science to your free Lesson Planner: enter your class schedule once and every period shows the next lesson, skipping weekends and school breaks.

Add to my planner See the year’s sequence

More lessons in “Light & sound”

  1. Sound is vibration — Students show that vibrating materials make sound and sound can make materials vibrate.
  2. Seeing needs light — Students observe that objects can be seen only when illuminated.
  3. Light through materials — Students test transparent, translucent and opaque materials.
  4. Shadows — Students make shadows and explain why they form.
  5. Communicate over distance — Students design a device that uses light or sound to send a message.
  6. Sound can make things move — Students show that sound can make materials vibrate.
  7. Loud and soft, high and low — Students change the volume and pitch of a sound.
  8. Mirrors and reflection — Students redirect a beam of light with a mirror.

Something to improve in this lesson? Tell us.