🔬 4th Grade · Science4-PS4-3Unit 2: Waves & information

Codes and signals

🎯 Objective: Students compare ways to send a message with a pattern.

📘 This lesson comes as a booklet: teacher’s plan, student worksheet, challenge page, quiz and answer key — all in one printable booklet. Teach from this page, print it all, or give the quiz to the class online.

Full-screen slides for the projector: goals, opener, every drawing already made, the exit ticket and the quiz — click or use the arrow keys.

✅ Quiz & class code

🗓️ Lesson at a glance

⏱️ 55 minutes

  1. 5 min Opener (pick one)
  2. 8 min Teach: three codes
  3. 6 min Model: one word, three ways
  4. 15 min Investigation: test the codes
  5. 6 min Compare the data
  6. 4 min Exit ticket
  7. 6 min Wrap-up
  8. 5 min Handing out, moving and cleaning up

Not in these 55 minutes: the worksheets (independent practice tomorrow, in centers or as homework) and the quiz (after the practice, or at the end of the week).

🧰 Materials

  • Flashlights (one per pair)
  • Morse code chart (one per pair)
  • Binary cards: 5 index cards per pair with 16, 8, 4, 2 and 1 dots drawn on one side, blank on the other
  • Letter number chart (A = 1 … Z = 26)
  • Pencils or a drum/desk for tapping
  • Stopwatch or the board timer
  • Data table on the worksheet

🔤 Key words

signal
A sound, light or movement that sends information.
code
A set of signals that stands for letters or words.
reliable
Works correctly again and again — the message arrives without mistakes.
data
Facts and measurements we collect, like times and numbers of mistakes.
binary
A code that uses only two choices, like on/off or face up/face down.
compare
To look at how things are alike and different.

🎯 Success criteria — read them to the class

  • I can send a short word to a partner with three different codes.
  • I can collect data on how fast and how reliable each code is.
  • I can compare the codes and use my data to say which works best and why.

🎬 Open the lesson — pick one (5 min)

Get the class moving, curious and talking before the learning starts. Each one leads straight into today’s topic.

🤸 Brain break: Signal relay

  1. Sit tall. Put both hands on your desk.
  2. When I flash the lights once, tap your desk once. Twice — tap twice.
  3. Now listen: I clap 3 times. Hold up that many fingers.
  4. Raise one hand for ‘yes’, both hands for ‘no’. Is today Thursday? Show me!
  5. Stretch your arms up slowly, then rest them in your lap.

Say: “You just answered with taps, fingers and hands — all codes. Some were fast, some were easy to mess up. Today engineers in this room will test three codes and decide which is best.”

🧩 Riddle

“I can be a flash, a beat or a card turned over. I carry a message, but I’m not a letter in an envelope. What am I?”

Hint: Phones and computers send millions of me every second.

Answer

A signal! Today we compare different ways to send signals.

🎁 Mystery object

Do: Hold up five cards face down in a row. Turn over the second and the fifth cards: one shows 8 dots, the other shows 1 dot.

Say: “These cards are sending me a letter. 8 dots and 1 dot are showing. If A is 1, B is 2, C is 3… which letter is it?”

Reveal: 8 + 1 = 9, and the 9th letter is I. Computers use a code like this, with only “on” and “off” — today you’ll try it.

🤔 Would you rather

“Would you rather send a message that is super fast but sometimes wrong, or a little slower but always right?”

Do: Students stand on the left for ‘fast’ and the right for ‘always right’, then share one reason.

Then: It depends on the message! For an emergency, right matters most. Today you will measure both speed and reliability.

🧑‍🏫 Teach it step by step

  1. 1 Teach: three codes 8 min

    Do:
    • Show the board slide with the three codes. Demonstrate each one with the letter C.
    Say:

    “Code 1, the tap code: tap the letter’s number. A is 1 tap, B is 2 taps, C is 3 taps — all the way to Z, 26 taps.”

    “Code 2, Morse code with a flashlight: short flash for a dot, long flash for a dash. C is dash-dot-dash-dot.”

    “Code 3, binary cards: five cards with 16, 8, 4, 2 and 1 dots. Turn up the cards that add to the letter’s number. C is 3, so I show the 2 card and the 1 card. The rest stay face down.”

    “Your job: send the same word with all three codes, time each one, and count mistakes. Then decide which code is best.”

    Ask: Which code do you predict will be fastest? Most reliable?

    Look for: Any prediction with a reason. Write it down so we can check it later.

  2. 2 Model: one word, three ways 6 min

    Do:
    • With a student partner, send the word HI with each code while the class times you on the board timer.
    Say:

    “Tap code: H is the 8th letter — 8 taps. I is 9 taps. 17 taps in all.”

    “Morse: H is dot-dot-dot-dot, I is dot-dot. Only 6 flashes.”

    “Binary: H is 8 — just the 8 card. I is 9 — the 8 and the 1 cards. Each letter always uses the same 5 card spots.”

    Ask: Why would the tap code be very slow for the word ZOO?

    Look for: Z is 26 taps and O is 15 — that’s 56 taps, and it’s easy to lose count.

  3. 3 Investigation: test the codes 15 min

    Do:
    • Pairs pick one word from the list: BED, DOG, CAT, HAT, SUN.
    • Partner A sends the word with the tap code while Partner B decodes. Record the time and whether the word arrived correctly.
    • Repeat with Morse flashlight and with binary cards. Then switch roles and do it with a new word.
    Say:

    “Start the timer when the sender begins and stop it when the receiver says the word.”

    “Be honest in your data: if the word arrived wrong, write it down. Mistakes are data too.”

    “Keep everything else the same for each code — same word, same partners — so the test is fair.”

    Ask: Walk around and ask: “What caused your mistake?”

    Look for: Losing count of taps, flashes too short or too long, adding the card numbers wrong.

    Ask: Why do we use the same word for all three codes?

    Look for: To make it a fair test — only the code changes.

  4. 4 Compare the data 6 min

    Do:
    • Make a class chart on the board: each pair adds a tally for the fastest code and for the most reliable code.
    Say:

    “Look at the class tallies. Which code was fastest most often? Which had the fewest mistakes?”

    “A good engineer uses evidence: “Morse was fastest because our times were …””

    “Computers and phones use a code like our binary cards — only two choices, on or off — because two clear choices are hard to mix up.”

    Ask: Was your prediction right? What does the data say?

    Look for: Answers vary; students cite their times and mistakes.

  5. 5 Exit ticket 4 min

    Do:
    • Students write on a sticky note.
    Say:

    “Which code was fastest? Which was most reliable? Give one number from your data for each.”

    ✅ Correct answer: Answers vary with the data, e.g. “Morse was fastest — 25 seconds for DOG. Binary cards were most reliable — 0 mistakes.” A good answer names a code AND gives evidence from the data. (A claim with no number is ‘almost’ — ask for the evidence.)

  6. ✓ Wrap-up 6 min

    Do:
    • Collect flashlights and cards.
    • Collect exit tickets and sort: got it / almost / not yet.
    Say:

    “Tell your partner: if you had to send an emergency message, which code would you choose and why?”

    “Show me with your fingers how sure you are about each “I can”: 1 = not yet, 2 = almost, 3 = I can teach it.”

💡 Teacher tips

  • Make the binary cards before class (5 index cards per pair). Drawing dots in a 4×4 grid for the 16 card keeps them easy to count.
  • Post the A = 1 … Z = 26 chart large; the tap code and the binary cards both need it.
  • Keep words three letters or shorter — the point is comparing codes, not long spelling.
  • Remind students: never shine flashlights into eyes; aim at the desk.
  • If time is short, each pair tests only one word with all three codes and skips the role switch.

💬 Discussion questions

  1. Why might a fast code not be the best choice?

    If it often arrives wrong, the message is useless — especially in an emergency.

  2. Why is the binary code easy for machines?

    It has only two choices (on or off), which are very hard to confuse.

  3. Where do people still use light or sound signals today?

    Traffic lights, a lighthouse, a fire alarm, a car’s turn signal, a whistle at a game.

⚠️ Common mistakes and how to fix them

❌ Changing more than one thing (different words for different codes).

✔️ Fair test: the same word for every code, so only the code changes.

❌ Choosing a ‘best’ code with no evidence.

✔️ Ask: “What number in your data shows that?”

❌ Adding binary cards wrong (showing 4 and 2 for E).

✔️ E is 5: 4 + 1. Check by adding the face-up dots before sending.

❌ Losing count on the tap code.

✔️ That’s data! Write it as a mistake — it shows the tap code is less reliable for big numbers.

🧩 For every learner

🤝 Extra support

  • Use two-letter words (HI, ME, BE).
  • Give a binary helper chart with the cards for A–J already shown.
  • Frame: “___ was fastest because ___ seconds. ___ was most reliable because ___ mistakes.”

🚀 Challenge

  • Find the letter for each binary row: 10011, 01110.
  • Invent a fourth code and test it against the best one.
  • Explain why five binary cards are enough for all 26 letters (the biggest sum is 16 + 8 + 4 + 2 + 1 = 31).

🌎 English learners

  • Model each code with gestures before students try it.
  • Use the words fast/slow and right/wrong on picture cards.
  • Pair with a partner who reads the data table aloud.

🏠 At home: Make your own set of 5 binary cards (16, 8, 4, 2, 1) from paper. Send your first name to a family member, one letter at a time, and see if they can decode it with the A = 1 … Z = 26 chart.

📊 After the exit ticket and quiz: what to do tomorrow

Sort the exit tickets (or open the quiz results — they group the class for you) and start tomorrow with 10 minutes in three groups.

✅ Got it

  • Start the next lesson (Plant structures).
  • Early finishers: decode the Challenge binary message and design a code for a noisy, dark room.

🟡 Almost

  • 5 minutes: practice making 3 letters with the binary cards (C, F, I) and checking the sum.
  • Review: name one code and give its time from yesterday’s data.

🔁 Not yet

  • Small group: the teacher sends HI with each code; students record the times in a mini table and circle the fastest.
  • Then the Easier worksheet with the letter chart, teacher nearby.

🤝 Codes: send a letter

Same skill, smaller numbers and fill-in-the-blank steps — for students who need extra support. Everyone else starts on the main worksheet.

Name: ______________________   Date: ____________

A=1 B=2 C=3 D=4 E=5 F=6 G=7 H=8 I=9

A. Tap code: how many taps?

  1. C = ___ tapsAnswer: ________________________
  2. E = ___ tapsAnswer: ________________________
  3. BED = ___ + ___ + ___ = ___ tapsAnswer: ________________________

B. Binary cards (16, 8, 4, 2, 1): which cards are face up?

  1. A (1) → the ___ cardAnswer: ________________________
  2. F (6) → the ___ and ___ cardsAnswer: ________________________
  3. The 8 card and the 1 card are face up. What letter? ___Answer: ________________________
🔑 Answers
  1. 3
  2. 5
  3. 2 + 5 + 4 = 11
  4. 1
  5. 4 and 2
  6. I (8 + 1 = 9)

📝 Codes and signals: which is best?

Name: ______________________   Date: ____________

A=1 B=2 C=3 D=4 E=5 F=6 G=7 H=8 I=9 J=10 K=11 L=12 M=13 N=14 O=15 P=16 Q=17 R=18 S=19 T=20 U=21 V=22 W=23 X=24 Y=25 Z=26. Binary cards: 16 8 4 2 1 (1 = face up, 0 = face down).

A. Decode or encode.

  1. Binary 00011 = which letter?Answer: ________________________
  2. Binary 10100 = which letter?Answer: ________________________
  3. Write K (11) as a binary row.Answer: ________________________
  4. How many taps to send DOG with the tap code?Answer: ________________________

B. Our data.

  1. Record your time and mistakes for each code: tap, Morse, binary.Answer: ________________________
  2. Which code was fastest? Use a number from your data.Answer: ________________________
  3. Which code was most reliable? Use a number from your data.Answer: ________________________

C. Think.

  1. Why is the tap code a poor choice for the word ZOO?Answer: ________________________
🔑 Answers
  1. C (2 + 1 = 3)
  2. T (16 + 4 = 20)
  3. 01011 (8 + 2 + 1)
  4. 4 + 15 + 7 = 26 taps
  5. Answers vary — three times and three mistake counts from the test.
  6. Answers vary; must name a code and quote a time.
  7. Answers vary; must name a code and quote the number of mistakes.
  8. Z is 26 taps and O is 15 taps — 56 taps in all. It is slow and easy to lose count.

🚀 Challenge: code engineer

Name: ______________________   Date: ____________

A. Solve and explain.

  1. Decode the binary message: 10011 10101 01110Answer: ________________________
  2. Why are five binary cards enough to send every letter A–Z?Answer: ________________________
  3. A team sent CAT. Tap code: 12 seconds, 1 mistake. Morse: 15 seconds, 0 mistakes. Which would you choose for an emergency? Why?Answer: ________________________

B. Design.

  1. Design a code for sending YES or NO across a noisy, dark room. Draw how it works and explain why it is reliable.
🔑 Answers
  1. SUN (19 = 16+2+1, 21 = 16+4+1, 14 = 8+4+2)
  2. All five cards add to 16 + 8 + 4 + 2 + 1 = 31, which is more than 26, so every letter number can be made.
  3. Morse — it was only 3 seconds slower and arrived with 0 mistakes; in an emergency a correct message matters most.
  4. Any reasoned design, e.g. a rope tug: 1 tug = YES, 2 tugs = NO. Reliable because touch works with no light or quiet.

✅ Quiz

12 questions. Show them on the board and answer together, or give each student the quiz on their own device and see everyone’s score.

Students scan the QR code or type the short code, write their name and answer. You get a table with every student’s score and the questions most of the class missed.

1. With the tap code (A = 1 tap … Z = 26 taps), how many taps send the letter E?

2. In the binary cards (16, 8, 4, 2, 1), the 4 card and the 1 card are face up. Which letter is it?

3. What does ‘reliable’ mean for a code?

4. Why did we send the SAME word with every code?

5. Zoe says the tap code is best because it is easy. Her data: tap code 40 seconds, 2 mistakes; binary 20 seconds, 0 mistakes. What should she conclude?

6. Which signal would work best to send a message across a loud cafeteria?

7. How many taps send the word BAD with the tap code?

8. Which is NOT a signal that carries information?

9. Why do computers use a binary code?

10. Eli flashed H as dot-dot-dot-dot. His partner wrote S (dot-dot-dot). What most likely went wrong?

11. Which piece of evidence best supports “Morse was the fastest code”?

12. Binary row 01000 (16 8 4 2 1) shows which letter?

12 questions

🖨️ Classroom aids to print

Word-wall cards for this lesson’s key words. They print on their own pages.

signalA sound, light or movement that sends information.
codeA set of signals that stands for letters or words.
reliableWorks correctly again and again — the message arrives without mistakes.
dataFacts and measurements we collect, like times and numbers of mistakes.
binaryA code that uses only two choices, like on/off or face up/face down.
compareTo look at how things are alike and different.

Where this lesson fits

  • Before this lesson: How we see — Students draw a model of light reflecting from an object into the eye.
  • This lesson: Students compare ways to send a message with a pattern.
  • Coming next: Plant structures — Students argue how plant structures support survival and reproduction.

📐 Standard

4-PS4-3

Next Generation Science Standards (NGSS), Grade 4 — typical US unit order

🏁 Unit goals

  • Model wave amplitude and wavelength
  • Model how light reflection lets us see
  • Compare ways to transmit information

🌟 Thinkabara Pro

Need this lesson made for your class?

The booklet on this page is free. With Pro you get versions of it: three levels for mixed classes, in Spanish, or adapted for IEP and ELL students — plus a new booklet on any topic you teach that is not in our library.

Make a version for my class — free trial → See a real sample

7 days free, no credit card.

Practice & resources on Thinkabara

🗓️ Plan the whole year like this

Add 4th Grade Science to your free Lesson Planner: enter your class schedule once and every period shows the next lesson, skipping weekends and school breaks.

Add to my planner See the year’s sequence

More lessons in “Waves & information”

  1. Wave models — Students model waves with amplitude and wavelength.
  2. Seeing with reflected light — Students model how light reflects off objects into the eye.
  3. Sending patterns — Students compare solutions that use patterns to transmit information (Morse code).
  4. Making waves — Students make waves in water and on a rope and describe the pattern.
  5. Amplitude and wavelength — Students label amplitude and wavelength on a wave model.
  6. How we see — Students draw a model of light reflecting from an object into the eye.
  7. Codes and signals — Students compare ways to send a message with a pattern.

Something to improve in this lesson? Tell us.