Drop different balls from the same height and measure each bounce against a tape measure on the wall. Little scientists love being the “bounce spotter.”
Free · US Letter · no sign-up
In the print window, set Destination (or Printer) to “Save as PDF”, then press Save. On iPhone: Share → Print → pinch out → Share → Save to Files.
Hypothesis: If I drop a tennis ball, a ping-pong ball, a rubber bouncy ball and a basketball from the same height, then the bouncy ball will go highest because it is made of very bouncy rubber.
Variables
Independent variable (what you change): The kind of ball
Dependent variable (what you measure): How high the first bounce goes (inches)
Controlled variables (keep the same): Drop height (3 feet / 1 m); The same hard floor; Dropping, not throwing
Materials
4 different balls (bouncy ball, tennis ball, ping-pong ball, playground or basketball)
A tape measure or yardstick
Masking tape
A helper
A phone camera (optional, slow-motion helps)
Procedure — step by step
Tape the tape measure to a wall so it stands straight up from a hard floor.
Hold the bottom of the first ball at the 36-inch mark.
Let go without pushing.
Your helper watches where the bottom of the ball reaches on the first bounce. (Filming in slow motion makes this easy.)
Write down the bounce height.
Do 3 drops for each ball.
Find the average and put the balls in order from highest to lowest bounce.
Data table
Bounce height from a 36-inch drop (inches)
Ball
Trial 1
Trial 2
Trial 3
Average
Bouncy ball
Tennis ball
Ping-pong ball
Basketball
Graph it as a bar graph: put “Ball” on the x-axis and your measurement on the y-axis.
Printable project sheets
A plan with every step, and a data sheet with a graph grid and conclusion lines.
Project plan
🏀 Which Ball Bounces the Highest?
Name:Due:
Question: Which kind of ball bounces the highest?
My hypothesis: If I drop a tennis ball, a ping-pong ball, a rubber bouncy ball and a basketball from the same height, then the bouncy ball will go highest because it is made of very bouncy rubber.
Change: The kind of ball · Measure: How high the first bounce goes (inches) · Keep the same: Drop height (3 feet / 1 m); The same hard floor; Dropping, not throwing
Materials
4 different balls (bouncy ball, tennis ball, ping-pong ball, playground or basketball)
A tape measure or yardstick
Masking tape
A helper
A phone camera (optional, slow-motion helps)
Steps (check them off)
☐ Tape the tape measure to a wall so it stands straight up from a hard floor.
☐ Hold the bottom of the first ball at the 36-inch mark.
☐ Let go without pushing.
☐ Your helper watches where the bottom of the ball reaches on the first bounce. (Filming in slow motion makes this easy.)
☐ Write down the bounce height.
☐ Do 3 drops for each ball.
☐ Find the average and put the balls in order from highest to lowest bounce.
A small rubber bouncy ball usually bounces highest, often more than two thirds of the drop height. A properly pumped basketball and a ping-pong ball do well too; a tennis ball usually bounces lower. Results depend on the floor and how well the ball is pumped.
The science behind it
When a ball hits the floor it squishes, storing energy like a spring, then pops back into shape and pushes off the floor. Some energy is always lost as heat and sound, so the ball never bounces back to where it started. Balls made of springy materials lose less energy and bounce higher.
Take it further
Try the same ball on carpet, grass and wood.
Put a tennis ball in the freezer for an hour and test it cold.
Drop from 2 feet, 3 feet and 4 feet.
Putting it on your board
Left panel: question, hypothesis and variables. Center: your title, graph and photos of the setup. Right panel: procedure summary, results and conclusion. See the scientific method guide for a printable board layout and judging checklist, or browse more kindergarten projects.
Frequently asked questions
Is “Which Ball Bounces the Highest” a good science fair project for grades k–1?
Yes. It is rated easy, takes 1 afternoon, costs under about $10 and has a real measurable result, which is what judges look for.
What is the independent variable in this project?
The kind of ball. The dependent variable (what you measure) is: how high the first bounce goes (inches).
What results should I expect?
A small rubber bouncy ball usually bounces highest, often more than two thirds of the drop height. A properly pumped basketball and a ping-pong ball do well too; a tennis ball usually bounces lower. Results depend on the floor and how well the ball is pumped.
How many trials should I do?
At least three for every condition, then average them. More trials make your conclusion stronger, and if one trial is very different, you can explain why (and maybe redo it).
📱 Scan me! Thousands more FREE pages Coloring pages, worksheets, games & party tools — all free at thinkabara.com Scan to open this page online · thinkabara.com/science/science-fair-projects/which-ball-bounces-highest
🦫 Thinkabara stores only what the site needs on your device (like your favorites and AI tool files) plus anonymous visit counts. No ads, no tracking cookies. Cookie policy · Privacy