Build a pizza-box solar oven and test how the angle of the foil reflector changes the temperature inside. Finish by melting chocolate on a graham cracker.
Free · US Letter · no sign-up
In the print window, set Destination (or Printer) to “Save as PDF”, then press Save. On iPhone: Share → Print → pinch out → Share → Save to Files.
Question: How does the angle of the reflector flap affect the temperature inside a solar oven?
Hypothesis: If the reflector is angled to bounce sunlight straight into the box, then the oven will get hottest, because more light energy enters and is absorbed.
Variables
Independent variable (what you change): Reflector angle from the box top (30°, 45°, 60°, 90°)
Dependent variable (what you measure): Temperature inside after 30 minutes (°F/°C)
Controlled variables (keep the same): Same box; Time of day (11 a.m.–2 p.m.); Box facing the sun; Same thermometer position
Materials
Pizza box
Aluminum foil
Black construction paper
Clear plastic wrap
Tape and glue stick
Ruler, pencil, box cutter (adult)
Oven thermometer
Protractor
Wooden skewer to prop the flap
Procedure — step by step
Have an adult cut three sides of a flap in the lid, leaving 1 inch (2.5 cm) from the edges.
Cover the inside of the flap with smooth foil, shiny side out.
Tape plastic wrap tightly over the lid opening to make a window.
Line the bottom with black paper.
Set the oven in full sun, place the thermometer in the center, and prop the flap at 30° using a protractor and skewer.
Record the temperature after 30 minutes, then let the oven cool in shade for 10 minutes.
Repeat for 45°, 60° and 90°, then repeat all angles on 2 more sunny days.
Average the temperatures for each angle.
⚠️ Safety: An adult uses the box cutter. The inside can get hot — use an oven mitt.
Data table
Temperature after 30 minutes (°F)
Flap angle
Day 1
Day 2
Day 3
Average
30°
45°
60°
90°
Graph it as a line graph: put “Flap angle” on the x-axis and your measurement on the y-axis.
Printable project sheets
A plan with every step, and a data sheet with a graph grid and conclusion lines.
Project plan
☀️ Build a Solar Oven: Does Foil Angle Matter?
Name:Due:
Question: How does the angle of the reflector flap affect the temperature inside a solar oven?
My hypothesis: If the reflector is angled to bounce sunlight straight into the box, then the oven will get hottest, because more light energy enters and is absorbed.
Change: Reflector angle from the box top (30°, 45°, 60°, 90°) · Measure: Temperature inside after 30 minutes (°F/°C) · Keep the same: Same box; Time of day (11 a.m.–2 p.m.); Box facing the sun; Same thermometer position
Materials
Pizza box
Aluminum foil
Black construction paper
Clear plastic wrap
Tape and glue stick
Ruler, pencil, box cutter (adult)
Oven thermometer
Protractor
Wooden skewer to prop the flap
Steps (check them off)
☐ Have an adult cut three sides of a flap in the lid, leaving 1 inch (2.5 cm) from the edges.
☐ Cover the inside of the flap with smooth foil, shiny side out.
☐ Tape plastic wrap tightly over the lid opening to make a window.
☐ Line the bottom with black paper.
☐ Set the oven in full sun, place the thermometer in the center, and prop the flap at 30° using a protractor and skewer.
☐ Record the temperature after 30 minutes, then let the oven cool in shade for 10 minutes.
☐ Repeat for 45°, 60° and 90°, then repeat all angles on 2 more sunny days.
☐ Average the temperatures for each angle.
Safety: An adult uses the box cutter. The inside can get hot — use an oven mitt.
A pizza-box oven often reaches 130–175°F (55–80°C) on a sunny day. The best angle depends on the sun’s height: around midday in summer it is often near 45–60°.
The science behind it
Sunlight carries energy as radiation. The foil reflects extra light into the box, the black paper absorbs it and turns it into heat, and the plastic window traps warm air — a small version of the greenhouse effect. The best reflector angle sends the most sunlight onto the black bottom, which depends on the angle of the sun in the sky.
Take it further
Add a second and third reflector.
Insulate the sides with newspaper and compare.
Track temperature through the day as the sun moves.
Putting it on your board
Left panel: question, hypothesis and variables. Center: your title, graph and photos of the setup. Right panel: procedure summary, results and conclusion. See the scientific method guide for a printable board layout and judging checklist, or browse more 6th grade projects.
Frequently asked questions
Is “Build a Solar Oven: Does Foil Angle Matter” a good science fair project for grades 6–7?
Yes. It is rated medium, takes 1 week (needs sunny days), costs under about $10 and has a real measurable result, which is what judges look for. A grown-up should help with some steps.
What is the independent variable in this project?
Reflector angle from the box top (30°, 45°, 60°, 90°). The dependent variable (what you measure) is: temperature inside after 30 minutes (°F/°C).
What results should I expect?
A pizza-box oven often reaches 130–175°F (55–80°C) on a sunny day. The best angle depends on the sun’s height: around midday in summer it is often near 45–60°.
How many trials should I do?
At least three for every condition, then average them. More trials make your conclusion stronger, and if one trial is very different, you can explain why (and maybe redo it).
📱 Scan me! Thousands more FREE pages Coloring pages, worksheets, games & party tools — all free at thinkabara.com Scan to open this page online · thinkabara.com/science/science-fair-projects/pizza-box-solar-oven
🦫 Thinkabara stores only what the site needs on your device (like your favorites and AI tool files) plus anonymous visit counts. No ads, no tracking cookies. Cookie policy · Privacy