🚗 Which Surface Slows a Toy Car the Most?

Roll the same toy car down a ramp onto carpet, tile, sandpaper, felt and aluminum foil and measure how far it travels. It is a clear look at friction.

Free · US Letter · no sign-up
Google Classroom Save to Pinterest Email me
🎒 5th grade🎒 6th grade🧲 Physics📶 Easy⏱️ 1–2 days💲 Under $10

Question: How does the type of floor surface affect how far a toy car rolls after leaving a ramp?

Hypothesis: If the surface is rougher, then the car will roll a shorter distance, because rough surfaces create more friction.

Variables

  • Independent variable (what you change): Surface (tile, foil, felt, carpet, sandpaper)
  • Dependent variable (what you measure): Distance rolled after the ramp (inches/cm)
  • Controlled variables (keep the same): Same car; Same ramp height: 6 inches (15 cm); Same release point, no pushing; Surface laid flat and long enough

Materials

  • A toy car
  • Ramp: a stiff board about 3 feet (1 m) long
  • Books to raise the ramp 6 inches
  • Surfaces: sheets of foil, felt, sandpaper, a carpet sample, bare tile floor
  • Tape measure
  • Masking tape to mark the release point

Procedure — step by step

  1. Set the ramp on books so the top is 6 inches (15 cm) high and tape the bottom edge to the floor.
  2. Mark a start line near the top of the ramp.
  3. Lay the first surface flat at the bottom of the ramp, taped down.
  4. Place the car at the line and let go without pushing.
  5. Measure from the end of the ramp to the front of the car.
  6. Do 3 trials on each surface.
  7. Repeat for all 5 surfaces.
  8. Average the distances and rank the surfaces.

Data table

Distance rolled (inches)
SurfaceTrial 1Trial 2Trial 3Average
Tile    
Foil    
Felt    
Carpet    
Sandpaper    

Graph it as a bar graph: put “Surface” on the x-axis and your measurement on the y-axis.

Printable project sheets

A plan with every step, and a data sheet with a graph grid and conclusion lines.

Project plan

🚗 Which Surface Slows a Toy Car the Most?

Name:Due:

Question: How does the type of floor surface affect how far a toy car rolls after leaving a ramp?

My hypothesis: If the surface is rougher, then the car will roll a shorter distance, because rough surfaces create more friction.

Change: Surface (tile, foil, felt, carpet, sandpaper) · Measure: Distance rolled after the ramp (inches/cm) · Keep the same: Same car; Same ramp height: 6 inches (15 cm); Same release point, no pushing; Surface laid flat and long enough

Materials

  • A toy car
  • Ramp: a stiff board about 3 feet (1 m) long
  • Books to raise the ramp 6 inches
  • Surfaces: sheets of foil, felt, sandpaper, a carpet sample, bare tile floor
  • Tape measure
  • Masking tape to mark the release point

Steps (check them off)

  1. ☐ Set the ramp on books so the top is 6 inches (15 cm) high and tape the bottom edge to the floor.
  2. ☐ Mark a start line near the top of the ramp.
  3. ☐ Lay the first surface flat at the bottom of the ramp, taped down.
  4. ☐ Place the car at the line and let go without pushing.
  5. ☐ Measure from the end of the ramp to the front of the car.
  6. ☐ Do 3 trials on each surface.
  7. ☐ Repeat for all 5 surfaces.
  8. ☐ Average the distances and rank the surfaces.

thinkabara.com/science/science-fair-projects/ramp-surface-friction

Data sheet + graph

Data: Distance rolled (inches)

SurfaceTrial 1Trial 2Trial 3Average
Tile
Foil
Felt
Carpet
Sandpaper

My bar graph (x: Surface)

Conclusion: Was my hypothesis supported? What did I learn?

thinkabara.com/science/science-fair-projects/ramp-surface-friction

What usually happens

Smooth tile and foil usually give the longest rolls; carpet and sandpaper stop the car quickly. Felt is often somewhere in the middle.

The science behind it

Friction is a force that acts when two surfaces rub together, and it always works against motion. A car rolling on a soft or rough surface also loses energy as the wheels push into the surface, called rolling resistance. The car starts each run with the same energy from the ramp height (gravitational potential energy), so differences in distance come from the surface.

Take it further

  • Change the ramp height and graph height vs. distance.
  • Add weights to the car.
  • Test the same surfaces with a sliding block instead of a car.

Putting it on your board

Left panel: question, hypothesis and variables. Center: your title, graph and photos of the setup. Right panel: procedure summary, results and conclusion. See the scientific method guide for a printable board layout and judging checklist, or browse more 5th grade projects.

Frequently asked questions

Is “Which Surface Slows a Toy Car the Most” a good science fair project for grades 5–6?

Yes. It is rated easy, takes 1–2 days, costs under about $10 and has a real measurable result, which is what judges look for.

What is the independent variable in this project?

Surface (tile, foil, felt, carpet, sandpaper). The dependent variable (what you measure) is: distance rolled after the ramp (inches/cm).

What results should I expect?

Smooth tile and foil usually give the longest rolls; carpet and sandpaper stop the car quickly. Felt is often somewhere in the middle.

How many trials should I do?

At least three for every condition, then average them. More trials make your conclusion stronger, and if one trial is very different, you can explain why (and maybe redo it).

More free printables from Thinkabara