🔬 5th Grade · Science5-PS1-1Unit 1: Structure & properties of matter

States of matter

🎯 Objective: Students model how particles are arranged in solids, liquids and gases.

📘 This lesson comes as a booklet: teacher’s plan, student worksheet, challenge page, quiz and answer key — all in one printable booklet. Teach from this page, print it all, or give the quiz to the class online.

Full-screen slides for the projector: goals, opener, every drawing already made, the exit ticket and the quiz — click or use the arrow keys.

✅ Quiz & class code

🗓️ Lesson at a glance

⏱️ 50 minutes

  1. 5 min Opener (pick one)
  2. 6 min Teach: three states, one kind of particle
  3. 8 min Act it out: be the particles
  4. 8 min Model it: draw the particles
  5. 5 min Explain: why does a gas fill a balloon?
  6. 5 min If time: squeeze test — if time
  7. 3 min Exit ticket
  8. 3 min Wrap-up
  9. 7 min Handing out, moving and cleaning up

Short on time? Skip the steps marked “if time” — the lesson still works.

Not in these 50 minutes: the worksheets (independent practice tomorrow, in centers or as homework) and the quiz (after the practice, or at the end of the week).

🧰 Materials

  • An ice cube, a cup of water and a balloon-covered container (opener)
  • Masking tape to mark a large rectangle on the floor (the “container”), or use a cleared space in the room
  • Plastic syringes without needles, 1 per pair, and a cup of water per pair (optional step)
  • A balloon
  • Recording sheet with three empty boxes for particle drawings, pencils
  • Round stickers or a bag of dried beans (optional, for building models)

🔤 Key words

solid
Matter with a shape of its own. Its particles are packed close and wiggle in place.
liquid
Matter that flows and takes the shape of its container. Its particles are close but slide past each other.
gas
Matter that spreads out to fill any container. Its particles are far apart and move fast.
state of matter
The form matter is in: solid, liquid or gas.
volume
How much space something takes up.
particle model
A drawing with dots that shows how the particles are arranged and how they move.

🎯 Success criteria — read them to the class

  • I can describe how particles are arranged and move in a solid, a liquid and a gas.
  • I can draw a particle model for each state of matter.
  • I can use the particle model to explain why a gas fills a balloon.

🎬 Open the lesson — pick one (5 min)

Get the class moving, curious and talking before the learning starts. Each one leads straight into today’s topic.

🤸 Brain break: Particle wiggle

  1. Stand up behind your chair, feet still.
  2. Solid: stay in your spot and wiggle gently in place, like you are shivering, for 5 seconds.
  3. Liquid: keep your feet planted and sway your upper body slowly side to side, like seaweed, for 5 seconds.
  4. Gas: wave your arms slowly in big circles in front of you (keep your head still) for 5 seconds.
  5. Back to solid: wiggle in place, then slowly sit down.

Say: “You just acted out three ways particles can move: wiggling in place, sliding around, and spreading out fast. Those are the three states of matter — solid, liquid and gas. Today we build a model of each one.”

🧩 Riddle

“In winter I am hard enough to skate on. In summer you can swim in me. On a hot day I rise into the air where you cannot see me at all. What am I?”

Hint: You drink me every day.

Answer

Water — the same matter can be a solid, a liquid or a gas!

🎁 Mystery object

Do: Set out three clear containers: one with an ice cube, one with water, and one that looks empty with a balloon stretched over its opening. Cover them with a cloth, then lift the cloth.

Say: “These three containers hold matter in three different states. Which one holds matter that you cannot see? What is in the “empty” one?”

Reveal: The ice is a solid, the water is a liquid, and the “empty” container is full of air — a gas. Squeeze the balloon gently: it pushes back. Gas particles are spread out, but they are there.

🤔 Would you rather

“Would you rather be a particle in an ice cube, in a glass of juice, or in the air?”

Do: Students hold up 1, 2 or 3 fingers and tell a partner what their particle would be doing.

Then: An ice particle wiggles in one place. A juice particle slides around its neighbors. An air particle zooms around with lots of space. Today you become all three.

🧑‍🏫 Teach it step by step

  1. 1 Teach: three states, one kind of particle 6 min

    Do:
    • Show the board slide — or draw three boxes labeled solid, liquid and gas.
    Say:

    “Ice, water and the water in the air are the same substance. The particles are the same kind. What changes is how close together they are and how they move.”

    “In a solid, particles are packed close together in fixed places. They wiggle, but they cannot move past each other. That is why a solid keeps its shape.”

    “In a liquid, particles are still close together, but they can slide past each other. That is why a liquid flows and takes the shape of its container — but keeps the same volume.”

    “In a gas, particles are far apart and move fast in every direction. They spread out to fill whatever container they are in.”

    Ask: You pour juice from a tall glass into a wide bowl. What changes and what stays the same?

    Look for: The shape changes to fit the bowl; the volume (the amount of juice) stays the same.

  2. 2 Act it out: be the particles 8 min

    Do:
    • Clear a space or mark a big rectangle on the floor with tape. Choose 10–12 students to be particles; the rest observe and then switch.
    • Solid: particles stand shoulder to shoulder in rows and wiggle gently in place.
    • Liquid: particles stay close (hands may brush shoulders) and slowly slide past each other in walking steps.
    • Gas: particles walk slowly but spread out to fill the whole rectangle, changing direction when they reach the tape. Walking only — no running or pushing.
    Say:

    “Observers: watch for two things — how close are the particles, and how do they move?”

    “Solid! Wiggle in your spot. Can you move past your neighbor? No.”

    “Liquid! Stay close, but slide past each other slowly. Notice the group can change shape.”

    “Gas! Spread out and fill the whole container — walking, not running. Notice how much empty space there is between you.”

    Ask: Observers: which state took up the whole container?

    Look for: The gas. The particles spread out until they filled all the space.

  3. 3 Model it: draw the particles 8 min

    Do:
    • Students draw three boxes (or use the recording sheet) and draw a particle model in each one with about 12 dots.
    • Add motion lines: small zigzags for a solid, curved arrows for a liquid, long straight arrows for a gas.
    Say:

    “Use about 12 dots in each box. In the solid, pack them close in neat rows. In the liquid, keep them close but jumbled, filling the bottom of the box. In the gas, spread them out all over the box.”

    “Add motion lines to show how the particles move.”

    “Under each box, finish the sentence: “In a ___, the particles …””

    Ask: Why do the liquid dots sit at the bottom of the box but the gas dots fill the whole box?

    Look for: Liquid particles stay close together and keep the same volume; gas particles spread out to fill the whole container.

  4. 4 Explain: why does a gas fill a balloon? 5 min

    Do:
    • Blow up a balloon and tie it. Hold it up.
    Say:

    “Why is this balloon round and firm, not floppy in one corner?”

    “The air inside is a gas. The gas particles move fast in every direction and keep hitting the inside of the balloon from all sides. All those tiny pushes hold the balloon out in a round shape.”

    “If I let some air out, there are fewer particles hitting the inside, so the balloon gets smaller and softer.”

    Ask: Why don’t the air particles all sink to the bottom of the balloon like water would?

    Look for: Gas particles are far apart and move fast in all directions, so they spread out to fill the whole balloon.

  5. 5 If time: squeeze testif time 5 min

    Do:
    • Pairs fill a syringe with air, cover the tip and push. Then (over a cup) fill it with water, cover the tip and push.
    Say:

    “Push the plunger with air inside. Now with water inside. Which one squeezes?”

    “The air squeezes because gas particles have lots of space between them. Water barely squeezes because liquid particles are already close together.”

    Ask: What would happen if you could fill the syringe with a solid, like a wooden stick?

    Look for: It would not squeeze at all — the particles in a solid are packed close in fixed places.

  6. 6 Exit ticket 3 min

    Do:
    • Students answer on a sticky note.
    Say:

    “Draw the particles in an ice cube. Then write one sentence explaining how they move.”

    ✅ Correct answer: Dots packed close together in neat rows, with small wiggle marks; “The particles are packed close and wiggle in place, so the ice keeps its shape.” Close dots with no explanation is “almost”; dots spread far apart or flowing like a liquid is “not yet”.

  7. ✓ Wrap-up 3 min

    Do:
    • Read the three “I can” statements aloud.
    • Collect exit tickets and sort them: got it / almost / not yet.
    Say:

    “Show your neighbor with your hands: solid, liquid, gas — and say how the particles move in each.”

    “Show me with your fingers how sure you are: 1 = not yet, 2 = almost, 3 = I can teach it.”

💡 Teacher tips

  • Set the rules for the act-it-out before anyone moves: walking only, hands to yourself, freeze when the teacher claps.
  • Run the act-it-out twice so every student is a particle once and an observer once.
  • Keep saying that the particles themselves do not change size or shape between states — only their spacing and motion change.
  • The particle model uses dots that are much bigger than real particles; say it each time so students do not think particles can be seen.
  • Liquids keep their volume but take the shape of the container. Pouring the same cup of water into a tall glass and a wide bowl makes this visible.

💬 Discussion questions

  1. Why does a block of wood keep its shape but water spreads out on the table?

    Wood is a solid: its particles are held in fixed places. Water is a liquid: its particles slide past each other, so it flows.

  2. Why can you squeeze air in a syringe but not water?

    Gas particles have lots of empty space between them; liquid particles are already close together.

  3. How are ice, liquid water and water in the air the same? How are they different?

    Same: they are all water, made of the same kind of particle. Different: in ice the particles are packed and wiggle, in liquid water they slide past each other, and in the air they are far apart and move fast.

  4. Why does a bike tire feel firm when it is full of air?

    The many fast-moving air particles inside keep pushing on the inside of the tire from every direction.

⚠️ Common mistakes and how to fix them

❌ Drawing solid particles not touching or spread far apart.

✔️ Have students stand shoulder to shoulder again: solid particles are packed close.

❌ Thinking particles get bigger in a gas.

✔️ The particles stay the same size; the space between them gets bigger.

❌ Thinking particles in a solid do not move at all.

✔️ They wiggle (vibrate) in place; they just cannot move past each other.

❌ Drawing liquid particles far apart like a gas.

✔️ Liquid particles are close together, about as close as in a solid, but jumbled and able to slide.

🧩 For every learner

🤝 Extra support

  • Give the three boxes with the first two dots already drawn in each.
  • Use beans on a paper plate to build each state before drawing it.
  • Sentence frame: “In a ___, the particles are ___ and they ___.”

🚀 Challenge

  • Draw what happens to the particles as an ice cube melts, in three frames.
  • Explain why a balloon left in a cold car gets a little smaller.
  • Write a short comic where a water particle travels from an ice cube to a puddle to the air.

🌎 English learners

  • Gestures for each state: fists together (solid), hands sliding (liquid), hands spreading wide (gas).
  • Picture cards: ice, a glass of water, a puddle, a balloon.
  • Sentence frame: “A solid / liquid / gas has particles that ___.”

🏠 At home: With a family member, find one solid, one liquid and one gas at home (hint: the gas may be inside something, like a ball or a bubble). Draw the particles in each one and explain your drawings.

📊 After the exit ticket and quiz: what to do tomorrow

Sort the exit tickets (or open the quiz results — they group the class for you) and start tomorrow with 10 minutes in three groups.

✅ Got it

  • Start the next lesson (does the weight change?).
  • Early finishers: challenge sheet — the melting ice cube comic.

🟡 Almost

  • 5 minutes: build each state with beans on a paper plate and say one sentence about how the particles move.
  • Fix the exit-ticket drawing of ice with a partner.

🔁 Not yet

  • Small group with the teacher: act out solid, liquid and gas again with 4 students, then draw each state together on mini whiteboards.
  • Then the Easier worksheet (solid, liquid or gas) with the teacher nearby.

🤝 Solids, liquids and gases

Same skill, smaller numbers and fill-in-the-blank steps — for students who need extra support. Everyone else starts on the main worksheet.

Name: ______________________   Date: ____________

A. Write solid, liquid or gas.

  1. An ice cube: ________Answer: ________________________
  2. Apple juice: ________Answer: ________________________
  3. The air in a balloon: ________Answer: ________________________
  4. A wooden block: ________Answer: ________________________

B. Circle the right words.

  1. In a solid, the particles are (packed close / far apart).Answer: ________________________
  2. In a liquid, the particles (slide past each other / stay in one place).Answer: ________________________
  3. In a gas, the particles (fill the whole container / sit at the bottom).Answer: ________________________
🔑 Answers
  1. solid
  2. liquid
  3. gas
  4. solid
  5. packed close
  6. slide past each other
  7. fill the whole container

📝 Particle models of matter

Name: ______________________   Date: ____________

A. Draw a particle model.

  1. Draw the particles in a solid (an ice cube).
  2. Draw the particles in a liquid (water in a cup).
  3. Draw the particles in a gas (air in a balloon).

B. Explain with particles.

  1. Why does a rock keep its shape?Answer: ________________________
  2. Why does milk take the shape of any glass you pour it into?Answer: ________________________
  3. Why does a gas fill a balloon?Answer: ________________________
  4. You pour 200 mL of water from a tall glass into a wide bowl. What is the volume in the bowl? What changed?Answer: ________________________

C. Compare.

  1. In which state are the particles farthest apart?Answer: ________________________
  2. Which state can be squeezed into a smaller space most easily? Why?Answer: ________________________
🔑 Answers
  1. Dots packed close in neat rows, small wiggle marks.
  2. Dots close together but jumbled, at the bottom of the cup, with curved arrows.
  3. Dots spread far apart filling the whole balloon, with long arrows in many directions.
  4. It is a solid: its particles are packed close in fixed places and only wiggle, so they cannot move past each other.
  5. It is a liquid: its particles are close but slide past each other, so it flows into the shape of the glass.
  6. Gas particles move fast in every direction and spread out until they fill the whole balloon, pushing on it from inside.
  7. Still 200 mL. Only the shape changed.
  8. Gas
  9. Gas, because there is lots of empty space between its particles.

🚀 Challenge: particle storyteller

Name: ______________________   Date: ____________

A. Think and explain.

  1. Ben drew ice as 12 dots spread all over the box with long arrows. What should he change, and why?Answer: ________________________
  2. A balloon is filled in a warm room and then left in a cold car. It looks a little smaller. Use particles to explain what might be happening.Answer: ________________________
  3. Why is it easy to walk through air, harder to walk through water in a pool, and impossible to walk through a wall?Answer: ________________________

B. Draw a story.

  1. Draw three frames showing an ice cube melting into a puddle. Show the particles in each frame.
🔑 Answers
  1. Pack the dots close together in rows and use small wiggle marks. In a solid, particles are packed close and wiggle in place; his drawing shows a gas.
  2. When the air cools, its particles move more slowly, so they push less on the inside of the balloon, and the balloon shrinks a little. The number of particles stays the same.
  3. Air particles are far apart, so you push them aside easily. Water particles are close but can slide aside. Wall particles are packed in fixed places and cannot move aside.
  4. Frame 1: packed rows (solid). Frame 2: some rows breaking apart, particles starting to slide. Frame 3: close but jumbled particles spread in a flat puddle (liquid).

✅ Quiz

12 questions. Show them on the board and answer together, or give each student the quiz on their own device and see everyone’s score.

Students scan the QR code or type the short code, write their name and answer. You get a table with every student’s score and the questions most of the class missed.

1. In which state of matter are the particles packed close together in fixed places?

2. Why does a liquid take the shape of its container?

3. Which particle model shows a gas?

4. Why does a balloon stay round when it is blown up?

5. Ben drew ice as dots spread far apart. What should he draw instead?

6. What changes when ice melts into water?

7. A syringe full of air squeezes easily, but one full of water hardly squeezes. Why?

8. 300 mL of juice is poured from a bottle into a bowl. How much juice is in the bowl?

9. Which is NOT a gas?

10. In which state do the particles move fastest and farthest?

11. Read the clues: it flows, it takes the shape of its container, and it keeps the same volume. Which state is it?

12. Predict: a pump pushes more air into a ball that is already full. What happens?

12 questions

🖨️ Classroom aids to print

Word-wall cards for this lesson’s key words. They print on their own pages.

solidMatter with a shape of its own. Its particles are packed close and wiggle in place.
liquidMatter that flows and takes the shape of its container. Its particles are close but slide past each other.
gasMatter that spreads out to fill any container. Its particles are far apart and move fast.
state of matterThe form matter is in: solid, liquid or gas.
volumeHow much space something takes up.
particle modelA drawing with dots that shows how the particles are arranged and how they move.

Where this lesson fits

  • Before this lesson: Mixing substances — Students determine if mixing creates new substances.
  • This lesson: Students model how particles are arranged in solids, liquids and gases.
  • Coming next: Does the weight change? — Students measure and graph weight before and after dissolving and melting.

📐 Standard

5-PS1-1

Next Generation Science Standards (NGSS), Grade 5 — typical US unit order

🏁 Unit goals

  • Model matter as tiny particles
  • Show weight is conserved
  • Identify materials and observe reactions

🌟 Thinkabara Pro

Need this lesson made for your class?

The booklet on this page is free. With Pro you get versions of it: three levels for mixed classes, in Spanish, or adapted for IEP and ELL students — plus a new booklet on any topic you teach that is not in our library.

Make a version for my class — free trial → See a real sample

7 days free, no credit card.

Practice & resources on Thinkabara

🗓️ Plan the whole year like this

Add 5th Grade Science to your free Lesson Planner: enter your class schedule once and every period shows the next lesson, skipping weekends and school breaks.

Add to my planner See the year’s sequence

More lessons in “Structure & properties of matter”

  1. Particles too small to see — Students model that matter is made of particles too small to be seen.
  2. Conservation of matter — Students measure that weight stays the same through changes.
  3. Properties of materials — Students identify materials by properties.
  4. Mixing substances — Students determine if mixing creates new substances.
  5. States of matter — Students model how particles are arranged in solids, liquids and gases.
  6. Does the weight change? — Students measure and graph weight before and after dissolving and melting.
  7. Identifying a mystery powder — Students use properties to identify an unknown material.
  8. Is it a new substance? — Students decide whether mixing two substances makes a new one.

Something to improve in this lesson? Tell us.